mastrad logohome







SEMI - AUTOMATIC PENSKY MARTENS FLASH POINT TESTER ASTM D93 - IP 34 - ASTM D3934; D3941; E134 (obs); E502; IP 304; IP 404; BS 2000 Part 34; BS 3900 Parts A8 and A9; BS 6664 Part 5 (obs); ISO 1516; ISO 1523; ISO 2719; DIN 51 758; AASHTO T73-811; NF M07-019; EN 22719; FTMS 791b 1102

SEMI - AUTOMATIC PENSKY MARTENS FLASH POINT TESTER

ASTM D93 - IP 34 - ASTM D3934; D3941; E134 (obs); E502; IP 304; IP 404;
BS 2000 Part 34; BS 3900 Parts A8 and A9; BS 6664 Part 5 (obs);
ISO 1516; ISO 1523; ISO 2719; DIN 51 758; AASHTO T73-811;
NF M07-019; EN 22719; FTMS 791b 1102

This test method covers determination of flash point by Pensky Martens closed cup tester of liquid fuel oils, lube oils, suspensions of solids, and liquids that tend to form a surface film under test conditions.

CHARACTERISTICS
  • Electric heating with regulator
  • Electric stirrer 120 rpm
  • Needle valve for a fine adjustment of the flame
  • Manual flame presentation

    • SPECIFICATION

    Semi- automatic Pensky Martens Flash Point Tester, housed in a cast aluminium case, incorporating conectors for electricity, gas and cooling water.

    The heating bath can be controlled to give a temperature rise of 5° to 6°C/min. for ASTM D93-IP34 Method A. stirrer stop/start and shutter are motor driven, controlled by push-button. Suitable for use with mains gas or canister gas

    N.B.: Above picture concerns Automatic Model

    See also:
    Automatic Pensky Model NPM 440
    Manual and Semi-Automatic Pensky Martens